What 'Clean and Sanitary' Actually Means Under Section 25.3
Almost every conversation about Ontario’s Bill 190 focuses on the cleaning record — the log, the QR code, the two most recent cleanings. That’s understandable. The record is the visible, documentable thing an inspector can point at.
But the record is only half the obligation. And it’s the less important half.
The duty that actually matters is set out in section 25.3 of the Occupational Health and Safety Act: washroom facilities provided to workers must be maintained in a clean and sanitary condition. That duty became enforceable on July 1, 2025 — six months before the record-keeping requirement came into force.
Here’s what that means, why the two obligations are separate, and how employers get caught out by focusing on the wrong one.
Two Duties, Two Dates
The confusion is understandable because Bill 190 introduced both obligations, but they landed at different times:
July 1, 2025 — Section 25.3 of the OHSA came into force. Employers and constructors must ensure that washroom facilities they provide for workers are maintained in a clean and sanitary condition.
January 1, 2026 — Ontario Regulation 480/24 came into force, clarifying how employers satisfy the requirement to keep, maintain and make available records of cleaning.
These are separate legal duties. You can comply with one and fail the other. In fact, the most common failure mode is exactly that: an employer with an immaculate digital log documenting the cleaning of a washroom that isn’t actually clean.
A perfect record of an inadequate cleaning program is not compliance. It’s documentation of non-compliance.
What the Act Does — and Doesn’t — Say
Section 25.3 uses the phrase “clean and sanitary condition.” The OHSA does not define it. Neither does O. Reg. 480/24.
That’s not an oversight. It’s a deliberate drafting choice, and it’s typical of how the OHSA handles standards that have to work across a nail salon, a steel mill, a hospital and a construction trailer. A prescriptive definition — so many wipe-downs per shift, so many parts per million of disinfectant — would be unworkable across that range and would go stale immediately.
Instead, the standard is contextual. “Clean and sanitary” means clean and sanitary for this facility, given how it is used. A washroom serving four office workers and a washroom serving two hundred production staff across three shifts have the same legal standard and very different practical requirements.
The Working Definition Inspectors Apply
In the absence of a statutory definition, guidance from Ontario’s health and safety associations has converged on a practical interpretation. Workplace Safety & Prevention Services frames it as washrooms being free from dirt, grime, germs and contaminants that pose a health risk, well-maintained, with prompt repair of broken fixtures like toilets and sinks, and with supplies such as hand towels, toilet paper and soap restocked as needed.
Unpack that and there are four distinct components:
1. Absence of visible soil
Surfaces, floors, fixtures and mirrors free from dirt and grime. This is what most people picture when they hear “clean,” and it’s the easiest part to get right.
2. Absence of health-risk contamination
This goes beyond visible cleanliness. A surface can look clean and still carry a pathogen load. This is where the distinction between cleaning and sanitizing matters — cleaning removes soil, sanitizing reduces microorganisms. A wipe with a dry cloth cleans; it does not sanitize.
3. Functional repair
Broken fixtures are a compliance issue, not just a maintenance annoyance. A toilet that won’t flush, a sink that won’t drain, a lock that won’t engage — each of these takes a facility out of “good repair” and, arguably, out of sanitary condition.
4. Consumable supplies
No soap means no handwashing. No toilet paper means the facility isn’t fit for its purpose. An empty dispenser is a compliance gap even if every surface gleams.
That fourth item is worth sitting with, because it’s the one that most often fails between cleanings. Your washroom can be cleaned to a high standard at 7 AM and be non-compliant by 11 AM because the soap ran out. The cleaning log will show a cleaning three hours ago. The facility is still not compliant.
Frequency: The Question the Regulation Refuses to Answer
The single most common question Ontario employers ask is how often washrooms must be cleaned. The regulation does not say. There is no prescribed minimum frequency anywhere in Bill 190, s.25.3 or O. Reg. 480/24.
This frustrates people who want a number. But the logic holds: the obligation is outcome-based, not input-based. You must clean as often as necessary to maintain a clean and sanitary condition. If that’s twice a day, it’s twice a day. If your facility’s usage means it’s every ninety minutes, it’s every ninety minutes.
The practical test: if an inspector walks into your washroom at any moment during operating hours, is it in a clean and sanitary condition? If the answer is “usually, but not right after the lunch rush,” your frequency is wrong regardless of what your schedule says on paper.
This is also why the record and the duty are linked in practice even though they’re separate in law. Your cleaning log is the evidence of your frequency. If the log shows one cleaning per day and the facility serves three shifts, the log is quietly documenting that your frequency is probably inadequate.
What This Means for Enforcement
Here’s the part employers underestimate. Because s.25.3 has been enforceable since July 1, 2025, an inspector doesn’t need to find a records problem to write you up. The condition of the washroom is itself a compliance question.
An inspector who walks into a facility and finds a washroom in poor condition can issue an order under s.25.3 — regardless of whether your cleaning log is immaculate. In fact, a well-maintained log documenting frequent cleanings alongside a washroom in poor condition is a worse position than no log at all, because you’ve helpfully documented that the cleanings are either not happening as recorded or not achieving the required standard.
The record is evidence. Make sure it’s evidence of something good.
Building a Program That Satisfies Both Duties
The organisations that handle this well treat the record as an output of a real cleaning program, not as the program itself. Practically:
Set frequency from usage, not habit. Walk each washroom at peak times. If it degrades between cleanings, the interval is too long. This is an empirical question and you can answer it in a week of observation.
Separate cleaning from sanitizing in your protocol. Your cleaning task list should distinguish “wipe surfaces” from “apply disinfectant with the required dwell time.” Dwell time — how long the product must stay wet on the surface to work — is the step most commonly skipped, and skipping it means you cleaned but didn’t sanitize.
Make supply checks part of the cleaning task. Soap, toilet paper, hand towels. Every cleaning, every time. Log it.
Route repairs immediately. A broken fixture noticed at 9 AM and reported at 5 PM is eight hours of non-compliance. Digital logging systems that let cleaning staff flag an issue at the point of cleaning close this gap; a paper log requires someone to notice, remember and tell someone.
Audit condition, not just records. Once a month, someone other than the cleaning staff should physically inspect each washroom against the four components above and note what they find. This is your early warning that the program has drifted.
The Bottom Line
The record-keeping requirement gets the attention because it’s new, concrete, and easy to write about. But it exists to serve the underlying duty, not to replace it.
Get the cleaning right and the record becomes an asset — proof of a genuine program that will hold up under any inspection. Get the cleaning wrong and the record becomes a liability that documents exactly how long the problem has been going on.